Fitur:
- Pita lega
- Ukuran Leutik
- Leungitna Sisipan Anu Saeutik
-
+86-28-6115-4929 -
sales@qualwave.com
Pembagi Daya 4 Arah／ Penggabung RF Microwave Milimeter Broadband Resistif Mikrostrip Daya Tinggi
Pembagi daya 4 arah ngabagi
Pembagi daya 4 arah ngabagi sinyal input kana opat kaluaran daya anu sami, kalayan amplitudo anu sami sareng bédana fase 0°. Saluyu sareng éta, combiner 4 arah tiasa ngagabungkeun sinyal tina opat port input kana hiji port output.
Kami tiasa nyayogikeun pembagi/combiner daya RF 4 arah, pembagi/combiner daya gelombang mikro 4 arah, pembagi/combiner daya gelombang milimeter 4 arah, pembagi/combiner daya tinggi 4 arah, pembagi/combiner daya mikrostrip 4 arah, pembagi/combiner daya resistor 4 arah, pembagi/combiner daya broadband 4 arah.
Pembagi/penggabung daya 4 arah ngagaduhan ciri-ciri ieu:
1. Alokasi sareng sintésis daya: Pamisah daya 4 arah tiasa nyebarkeun daya input sacara rata ka 4 port kaluaran, ngajaga kasaimbangan daya kaluaran; Konverter logika 4 arah ngagabungkeun opat sinyal kana hiji.
2. Isolasi anu luhur: Pembagi daya tiasa sacara efektif ngasingkeun saluran sinyal anu béda sareng ngirangan gangguan silih antara sinyal.
3. Kinerja pita lega: Kalayan karakteristik pita lega, cocog pikeun sistem komunikasi nirkabel dina pita frékuénsi anu béda.
4. Leungitna sisipan anu handap: Salila prosés distribusi sinyal, pembagi daya ngagaduhan leungitna sisipan anu handap, anu ngirangan atenuasi sinyal.
Pembagi/penggabung daya 4 arah diterapkeun dina aspék-aspék ieu:
1. Alokasi jaringan: Pamisah daya 4 arah umumna dianggo pikeun ngalokasikeun sinyal ka sababaraha alat panampi, sapertos distributor anteneu dina sistem komunikasi nirkabel.
2. Sistem anteneu: Pembagi daya tiasa nyebarkeun sinyal input sacara rata ka sababaraha anteneu, ningkatkeun rentang jangkauan sareng kualitas panarimaan sinyal.
3. Uji sinyal: Pembagi daya tiasa dianggo pikeun ngalokasikeun sinyal input kana alat uji anu béda pikeun uji sinyal multi-kanal, ningkatkeun efisiensi uji.
4. Stasion basis komunikasi: Pembagi daya maénkeun peran dina distribusi sinyal sareng isolasi di stasiun basis komunikasi, mastikeun transmisi sinyal anu stabil.
Qualwavenyadiakeun pembagi/combiner daya 4 arah kalayan frékuénsi ti DC dugi ka 67GHz, kalayan daya dugi ka 50000W sareng reliabilitas rugi sisipan anu luhur. Éta ngagaduhan sababaraha konektor sapertos SMA, N, 1.85mm, 1.92mm, BNC, jsb., kalayan rentang suhu operasi anu lega sareng kinerja anu stabil. Pembagi/combiner daya 4 arah kami seueur dianggo di seueur daérah. Produk ieu ngagaduhan waktos tunggu 2-3 minggu, sareng konsumén wilujeng sumping pikeun mesen.
Nomer Bagian | Frékuénsi RF(GHz, Min.)  | Frékuénsi RF(GHz, Maks.) | Kakuatan salaku Pamisah(W) | Kakuatan salaku Combiner(W) | Leungitna Sisipan(dB, Maks.) | Isolasi(dB, Min.) | Kasaimbangan Amplitudo(±dB, Maks.) | Kasaimbangan Fase(±°, Maks.) | VSWR(Maks.) | Konektor | Waktos prosés(Minggu) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QPD4-0-8000-2 | DC | 8 | 2 | - | 1.2 | 12 (biasana) | 0.5 | 25 | 1.35 | SMA, N | 2~3 |
| QPD4-0-18000-R5-S | DC | 18 | 0.5 | - | 2.0 | 5.5 | 1.0 | 8 | 1.8 | SMA | 2~3 |
| QPD4-0-26500-2-S | DC | 26.5 | 2 | - | 6 (biasana) | 12 (biasana) | - | - | 2 | SMA | 2~3 |
| QPD4-0-40000-2-K | DC | 40 | 2 | - | 1.5 (biasana) | 12 (biasana) | - | - | 1.8 | 2.92mm | 2~3 |
| QPD4-0-50000-2-2 | DC | 50 | 2 | - | 6 (biasana) | 12 (biasana) | - | - | 2 | 2.4mm | 2~3 |
| QPD4-0-67000-2-V | DC | 67 | 2 | - | 6 (biasana) | 12 (biasana) | - | - | 2 | 1,85mm | 2~3 |
| QPD4-0.009-10-K8-N | 9K | 0.01 | 800 | 800 | 0.3 | 20 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-0.009-10-1K2-N | 9K | 0.01 | 1200 | 1200 | 0.3 | 20 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-0.009-100-2K-N | 9K | 0.1 | 2000 | 2000 | 0.6 | 17 | 0.15 | 3 | 2 | N | 2~3 |
| QPD4-0.009-100-4K-7N | 9K | 0.1 | 4000 | 4000 | 0.6 | 15 | 0.15 | 3 | 1.4 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-0.009-100-4K-7N-1 | 9K | 0.1 | 4000 | 4000 | 0.4 | 12 | 0.1 | 3 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-0.009-100-5K-A1N | 9K | 0.1 | 5000 | 5000 | 0.6 | 15 | 0.15 | 3 | 1.4 | 1-5/8″ (IF70)&N | 2~3 |
| QPD4-0.009-100-10K-A1N | 9K | 0.1 | 10000 | 10000 | 0.6 | 15 | 0.15 | 3 | 1.4 | 1-5/8″ (IF70)&N | 2~3 |
| QPD4-0.009-250-50-S | 9K | 0.25 | 50 | - | 0.5 | 18 | 0.15 | 4 | 1.4 | SMA | 2~3 |
| QPD4-0.01-10-K2-N | 10K | 0.01 | 200 | 200 | 0.3 | 20 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-0.01-10-1K5-N | 10K | 0.01 | 1500 | 1500 | 0.3 | 20 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-0.01-40-K2-N | 10K | 0.04 | 200 | 200 | 0.4 | 20 | 0.1 | 3 | 1.4 | N | 2~3 |
| QPD4-0.01-40-K5-N | 10K | 0.04 | 500 | 500 | 0.4 | 20 | 1.15 | 3 | 1.2 | N | 2~3 |
| QPD4-0.01-40-1K-N | 10K | 0.04 | 1000 | 1000 | 0.4 | 20 | 0.1 | 3 | 1.5 | N | 2~3 |
| QPD4-0.01-40-2K-N | 10K | 0.04 | 2000 | 2000 | 0.4 | 20 | 0.15 | 3 | 1.5 | N | 2~3 |
| QPD4-0.01-100-K2-S | 10K | 0.1 | 200 | 200 | 0.75 | 15 | 0.15 | 3 | 2.3 | SMA | 2~3 |
| QPD4-0.01-100-1K-N | 10K | 0.1 | 1000 | 1000 | 0.5 | 18 | 0.1 | 3 | 1.4 | N | 2~3 |
| QPD4-0.1-400-K4-N | 0.0001 | 0.4 | 400 | 400 | 0.8 | 15 | 0.1 | 6 | 1.4 | N | 2~3 |
| QPD4-0.5-50-1K-N | 0.0005 | 0.05 | 1000 | - | 0.35 | 20 | - | - | 1.3 | N | 2~3 |
| QPD4-2.2-27-10-S | 0.0022 | 0.027 | 10 | - | 0.3 | 20 | 0.1 | 3 | 1.15 | SMA | 2~3 |
| QPD4-2.3-27-K2-S | 0.0023 | 0.027 | 200 | 200 | 0.3 | 20 | 0.1 | 3 | 1.15 | SMA | 2~3 |
| QPD4-2.3-27-2K5-7N | 0.0023 | 0.027 | 2500 | 2500 | 0.3 | 20 | 0.1 | 3 | 1.15 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-3-30-K2-S | 0.003 | 0.03 | 200 | 200 | 0.3 | 18 | 0.15 | 3 | 1.3 | SMA | 2~3 |
| QPD4-3-30-2K-N | 0.003 | 0.03 | 2000 | 2000 | 0.35 | 20 | - | - | 1.25 | N | 2~3 |
| QPD4-3-30-2K5-N | 0.003 | 0.03 | 2500 | 2500 | 0.3 | 20 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-4-30-3K-N | 0.004 | 0.03 | 3000 | 3000 | 0.35 | 20 | - | - | 1.25 | N | 2~3 |
| QPD4-4-30-20K-NA1 | 0.004 | 0.03 | 20000 | 20000 | 0.5 | 20 | - | - | 1.4 | N,1-5/8″ (IF70) | 2~3 |
| QPD4-5-30-50K-A1A2 | 0.005 | 0.03 | 50000 | 50000 | 0.5 | 20 | - | - | 1.45 | 1-5/8″ (IF70), 3-1/8″ (IF110) | 2~3 |
| QPD4-5-1000-1 | 0.005 | 1 | 1 | 0.5 | 2 | 16 | 0.2 | 1 | 1.5 | SMA, N, TNC, SMP | 2~3 |
| QPD4-10-100-R5 | 0.01 | 0.1 | 0.5 | 0.375 | 1.5 | 18 | 0.6 | 4 | 1.4 | SMA, BNC | 2~3 |
| QPD4-10-100-K5-N | 0.01 | 0.1 | 500 | 500 | 0.6 | 15 | 0.15 | 3 | 1.4 | N | 2~3 |
| QPD4-10-100-3K5-7N | 0.01 | 0.1 | 3500 | 3500 | 0.6 | 15 | 0.15 | 3 | 1.4 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-10-200-2K5-7N | 0.01 | 0.2 | 2500 | 2500 | 0.5 | 10 | 0.2 | 2 | 1.25 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-10-500-20-S | 0.01 | 0.5 | 20 | - | 1.2 | 20 | 0.4 | 4 | 1.4 | SMA | 2~3 |
| QPD4-10-500-K1-S | 0.01 | 0.5 | 100 | - | 0.7 | 12 | 0.2 | 5 | 1.6 | SMA | 2~3 |
| QPD4-10-520-2K5-7N | 0.01 | 0.52 | 2500 | 2500 | 0.8 | 6 | 0.3 | 5 | 1.35 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-10-520-2K5-EN | 0.01 | 0.52 | 2500 | 2500 | 0.8 | 10 | 0.3 | 5 | 1.35 | SC&N | 2~3 |
| QPD4-10-1000-K13-S | 0.01 | 1 | 130 | 130 | 0.9 | 16 | 0.3 | 5 | 1.7 | SMA | 2~3 |
| QPD4-20-100-K6-NMT | 0.02 | 0.1 | 600 | 600 | 0.5 | 18 | 0.3 | 3 | 1.3 | N&TNC | 2~3 |
| QPD4-20-200-1K-EN | 0.02 | 0.2 | 1000 | 1000 | 0.7 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-20-200-1K-N | 0.02 | 0.2 | 1000 | 1000 | 0.7 | 10 | 0.2 | 5 | 1.25 | N | 2~3 |
| QPD4-20-200-2K5-EN | 0.02 | 0.2 | 2500 | 2500 | 0.5 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-20-400-K2-S | 0.02 | 0.4 | 200 | 200 | 0.7 | 12 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-20-400-K3-S | 0.02 | 0.4 | 300 | 300 | 0.7 | 12 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-20-500-K1-S | 0.02 | 0.5 | 100 | 100 | 1 | 15 | 0.3 | 5 | 1.6 | SMA | 2~3 |
| QPD4-20-500-K2-S | 0.02 | 0.5 | 200 | 200 | 0.6 | 14 | 0.2 | 3 | 1.25 | SMA | 2~3 |
| QPD4-20-1000-K15-S | 0.02 | 1 | 150 | - | 0.9 | 17 | 0.2 | 5 | 1.5 | SMA | 2~3 |
| QPD4-20-1000-K2-S | 0.02 | 1 | 200 | 200 | 1 | 12 | 0.25 | 5 | 1.3 | SMA | 2~3 |
| QPD4-30-520-1K-N | 0.03 | 0.52 | 1000 | 1000 | 0.7 | 10 | 0.2 | 5 | 1.25 | N | 2~3 |
| QPD4-30-520-1K-EN | 0.03 | 0.52 | 1000 | 1000 | 0.7 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-30-560-60-S | 0.03 | 0.56 | 60 | - | 0.7 | 18 | 0.2 | 4 | 1.4 | SMA | 2~3 |
| QPD4-30-1000-K3-N | 0.03 | 1 | 300 | 300 | 0.9 | 5 | 0.3 | 5 | 1.3 | N | 2~3 |
| QPD4-40-900-R5-N | 0.04 | 0.9 | 0.5 | 0.375 | 1.8 | 18 | 0.8 | 4 | 1.4 | N | 2~3 |
| QPD4-50-520-2K-EN | 0.05 | 0.52 | 2000 | 2000 | 0.7 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-50-1000-K3-N | 0.05 | 1 | 300 | 300 | 1 | 12 | 0.2 | 5 | 1.35 | N | 2~3 |
| QPD4-70-75-K1-S | 0.07 | 0.075 | 100 | 100 | 0.7 | 20 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-70-75-K5-S | 0.07 | 0.075 | 500 | 500 | 0.7 | 20 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-70-500-1K4-7N | 0.07 | 0.5 | 1400 | 1400 | 0.9 | 8 | 0.2 | 3 | 1.35 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-70-2000-30-B | 0.07 | 2 | 30 | 2 | 5.8 | 18 | 0.4 | 4 | 1.3 | BNC | 2~3 |
| QPD4-76-108-50-N | 0.076 | 0.108 | 50 | - | 0.25 | 20 | 0.1 | 3 | 1.18 | N | 2~3 |
| QPD4-80-200-3K-EN | 0.08 | 0.2 | 3000 | 3000 | 0.5 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-80-400-3K-7N | 0.08 | 0.4 | 3000 | 3000 | 0.5 | 10 | 0.2 | 5 | 1.25 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-80-400-3K5-A17 | 0.08 | 0.4 | 3500 | 3500 | 0.5 | _ | 0.2 | 4 | 1.4 | 1-5/8″ (IF70)&7/16 DIN (L29) | 2~3 |
| QPD4-80-500-30-S | 0.08 | 0.5 | 30 | 2 | 1.5 | 20 | 0.2 | 3 | 1.25 | SMA | 2~3 |
| QPD4-80-520-K2-S | 0.08 | 0.52 | 200 | 200 | 0.7 | 12 | 0.2 | 5 | 1.3 | SMA | 2~3 |
| QPD4-80-520-1K5-EN | 0.08 | 0.52 | 1500 | 1500 | 0.7 | 10 | 0.2 | 5 | 1.25 | SC&N | 2~3 |
| QPD4-80-520-1K5-7N | 0.08 | 0.52 | 1500 | 1500 | 0.7 | 10 | 0.2 | 5 | 1.25 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-80-1000-20-S | 0.08 | 1 | 20 | 20 | 0.9 | 12 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-80-1000-K2-S | 0.08 | 1 | 200 | - | 0.9 | 12 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-80-1000-K5-N | 0.08 | 1 | 500 | - | 0.9 | 12 | 0.2 | 5 | 1.35 | N | 2~3 |
| QPD4-80-1000-K75-N | 0.08 | 1 | 750 | 750 | 0.6 | 15 | 0.3 | 5 | 1.35 | N | 2~3 |
| QPD4-80-1000-1K-N | 0.08 | 1 | 1000 | 1000 | 0.9 | 5 | 0.3 | 5 | 1.3 | N | 2~3 |
| QPD4-80-1000-1K5-EN | 0.08 | 1 | 1500 | - | 0.9 | 5 | 0.3 | 5 | 1.3 | SC&N | 2~3 |
| QPD4-80-1000-2K-7N | 0.08 | 1 | 2000 | - | 0.9 | 5 | 0.3 | 5 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-80-1000-2K-7N-1 | 0.08 | 1 | 2000 | 2000 | 0.7 | - | 0.2 | 3 | 1.6 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-80-1000-3K5-A1N | 0.08 | 1 | 3500 | 3500 | 0.7 | - | 0.2 | 5 | 1.6 | 1-5/8″ (IF70)&N | 2~3 |
| QPD4-80-1000-3K5-A17 | 0.08 | 1 | 3500 | 3500 | 0.7 | - | 0.2 | 5 | 1.6 | 1-5/8″ (IF70)&7/16 DIN (L29) | 2~3 |
| QPD4-80-3000-30 | 0.08 | 3 | 30 | 2 | 4.6 | 20 | 0.3 | 2 | 1.3 | SMA, SMP | 2~3 |
| QPD4-100-180-K5 | 0.1 | 0.18 | 500 | 500 | 0.3 | 18 | 0.1 | 1 | 1.25 | N, TNC | 2~3 |
| QPD4-100-400-30-S | 0.1 | 0.4 | 30 | 2 | 1 | 20 | 0.3 | 3 | 1.25 | SMA | 2~3 |
| QPD4-100-500-50 | 0.1 | 0.5 | 50 | 3 | 0.8 | 20 | 0.2 | 3 | 1.25 | SMA, N | 2~3 |
| QPD4-100-500-K5-7 | 0.1 | 0.5 | 500 | 100 | 0.6 | 20 | 0.2 | 2 | 1.3 | 7/16 DIN (L29) | 2~3 |
| QPD4-100-520-K2-S | 0.1 | 0.52 | 200 | 200 | 0.9 | 12 | 0.2 | 5 | 2 | SMA | 2~3 |
| QPD4-100-520-K6-NMT | 0.1 | 0.52 | 600 | 600 | 0.7 | 10 | 0.3 | 3 | 1.3 | N&TNC | 2~3 |
| QPD4-100-520-2K-7N | 0.1 | 0.52 | 2000 | 2000 | 0.5 | 20 | 0.15 | 5 | 1.4 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-100-1000-30 | 0.1 | 1 | 30 | 2 | 1.8 | 18 | 0.3 (tipe) | 4(tipikal) | 1.25 | SMA, N | 2~3 |
| QPD4-100-2000-30-S | 0.1 | 2 | 30 | 2 | 3.4 | 20 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-100-4000-30-S | 0.1 | 4 | 30 | 1 | 4 | 15 | 0.4 | 8 | 1.5 | SMA | 2~3 |
| QPD4-105-140-K1 | 0.105 | 0.14 | 100 | 100 | 0.4 | 20 | 0.1 | 1 | 1.25 | N, TNC | 2~3 |
| QPD4-106-176-K1-N | 0.106 | 0.176 | 100 | 5 | 0.3 | 20 | 0.1 | 1 | 1.25 | N | 2~3 |
| QPD4-108-138-K21-N | 0.108 | 0.138 | 210 | 210 | 0.3 | 15 | 0.1 | 4 | 1.2 | N | 2~3 |
| QPD4-110-3800-30 | 0.11 | 3.8 | 30 | 2 | 3.5 | 19 | 0.2 | 4 | 1.4 | SMA, N | 2~3 |
| QPD4-118-138-K5-N | 0.118 | 0.138 | 500 | 200 | 0.5 | 25 | 0.2 | 2 | 1.2 | N | 2~3 |
| QPD4-120-150-50-N | 0.12 | 0.15 | 50 | 3 | 0.5 | 20 | 0.2 | 3 | 1.2 | N | 2~3 |
| QPD4-120-560-50-N | 0.12 | 0.56 | 50 | 3 | 1 | 20 | 0.2 | 3 | 1.2 | N | 2~3 |
| QPD4-136-174-K3-N | 0.136 | 0.174 | 300 | 25 | 0.4 | 20 | 0.2 | 2 | 1.2 | N | 2~3 |
| QPD4-138-960-50-N | 0.138 | 0.96 | 50 | 3 | 1 | 18 | 0.2 | 3 | 1.25 | N | 2~3 |
| QPD4-150-960-50-N | 0.15 | 0.96 | 50 | 2 | 1.4 | 20 | 0.4 | 4 | 1.4 | N | 2~3 |
| QPD4-150-2500-30-S | 0.15 | 2.5 | 30 | 2 | 2.8 | 18 | 0.3 | 4 | 1.25 | SMA | 2~3 |
| QPD4-175-225-1K3-NA7 | 0.175 | 0.225 | 1300 | 1300 | 0.7 | 10 | 0.2 | 3 | 1.35 | N&Pin φ1.6 | 2~3 |
| QPD4-200-250-30-S | 0.2 | 0.25 | 30 | 2 | 0.5 | 20 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-200-500-K3-N | 0.2 | 0.5 | 300 | 30 | 0.5 | 20 | 0.3 | 3 | 1.2 | N | 2~3 |
| QPD4-200-2000-30 | 0.2 | 2 | 30 | 2 | 1.6 | 20 | 0.3 | 3 | 1.3 | SMA, N | 2~3 |
| QPD4-200-3000-30 | 0.2 | 3 | 30 | 2 | 2 | 20 | 0.3 | 3 | 1.35 | SMA, N | 2~3 |
| QPD4-200-4000-30-S | 0.2 | 4 | 30 | 2 | 2.4 | 20 | 0.3 | 4 | 1.35 | SMA | 2~3 |
| QPD4-200-6000-20-S | 0.2 | 6 | 20 | 1 | 4 | 20 | 0.3 | 4 | 1.45 | SMA | 2~3 |
| QPD4-225-400-K1-N | 0.225 | 0.4 | 100 | 5 | 0.35 | 20 | 0.1 | 1 | 1.25 | N | 2~3 |
| QPD4-240-270-K2-S | 0.24 | 0.27 | 200 | 200 | 0.5 | 20 | 0.2 | 5 | 1.25 | SMA | 2~3 |
| QPD4-240-270-K2-N | 0.24 | 0.27 | 200 | 200 | 0.5 | 20 | 0.2 | 5 | 1.25 | N | 2~3 |
| QPD4-245-255-K1-S | 0.245 | 0.255 | 100 | 1 | 0.5 | 25 | 0.2 | 3 | 1.25 | SMA | 2~3 |
| QPD4-250-6000-30-S | 0.25 | 6 | 30 | 2 | 3.5 | 18 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-300-1000-K3-N | 0.3 | 1 | 300 | 30 | 0.4 | 18 | 0.3 | 3 | 1.25 | N | 2~3 |
| QPD4-300-3000-30-S | 0.3 | 3 | 30 | 2 | 1.2 | 20 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-300-6000-30-S | 0.3 | 6 | 30 | 2 | 2.5 | 20 | 0.3 | 4 | 1.35 | SMA | 2~3 |
| QPD4-300-18000-30-S | 0.3 | 18 | 30 | 5 | 5.9 | 18 | 0.4 | 5 | 1.5 | SMA | 2~3 |
| QPD4-300-26500-30-S | 0.3 | 26.5 | 30 | 2 | 8.3 | 18 | 0.5 | 6 | 1.6 | SMA | 2~3 |
| QPD4-300-40000-20-K | 0.3 | 40 | 20 | 2 | 11.8 | 18 | 0.5 | 7 | 1.7 | 2.92mm | 2~3 |
| QPD4-350-700-K2-S | 0.35 | 0.7 | 200 | 200 | 0.8 | 15 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-350-700-K5-S | 0.35 | 0.7 | 500 | 500 | 0.8 | 15 | 0.2 | 5 | 1.35 | SMA | 2~3 |
| QPD4-350-700-2K4-7N | 0.35 | 0.7 | 2400 | 2400 | 0.8 | 12 | 0.3 | 3 | 1.5 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-350-750-K3-NS | 0.35 | 0.75 | 300 | 300 | 0.5 | 20 | 0.2 | 4 | 1.25 | SMA&N | 2~3 |
| QPD4-350-750-2K-7N | 0.35 | 0.75 | 2000 | 2000 | 0.5 | 15 | 0.2 | 4 | 1.25 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-350-800-50-N | 0.35 | 0.8 | 50 | 10 | 0.5 | 18 | 0.3 | 3 | 1.25 | N | 2~3 |
| QPD4-350-830-K15-B | 0.35 | 0.83 | 150 | 15 | 0.8 | 20 | 0.3 | 3 | 1.3 | BNC | 2~3 |
| QPD4-350-3800-30 | 0.35 | 3.8 | 30 | 2 | 1.8 | 18 | 0.3 | 4 | 1.3 | SMA, N | 2~3 |
| QPD4-380-460-K1-7 | 0.38 | 0.46 | 100 | - | 0.5 | 20 | 0.3 | 3 | 1.25 | 7/16 DIN (L29) | 2~3 |
| QPD4-380-470-K3-N | 0.38 | 0.47 | 300 | 25 | 0.4 | 20 | 0.2 | 2 | 1.2 | N | 2~3 |
| QPD4-380-650-K2-S | 0.38 | 0.65 | 200 | - | 0.6 | 18 | 0.8 | 5 | 1.3 | SMA | 2~3 |
| QPD4-380-8000-30-S | 0.38 | 8 | 30 | 2 | 2.6 | 18 | 0.3 | 4 | 1.35 | SMA | 2~3 |
| QPD4-400-470-30-S | 0.4 | 0.47 | 30 | 2 | 0.5 | 20 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-400-500-10-S | 0.4 | 0.5 | 10 | - | 0.7 | 20 | 0.4 | 7 | 1.3 | SMA | 2~3 |
| QPD4-400-1000-30-N | 0.4 | 1 | 30 | 2 | 0.5 | 20 | 0.3 | 3 | 1.25 | N | 2~3 |
| QPD4-400-1000-K1-S | 0.4 | 1 | 100 | 100 | 0.6 | 10 | 0.2 | 5 | 1.3 | SMA | 2~3 |
| QPD4-400-1000-K1-N | 0.4 | 1 | 100 | 10 | 0.5 | 20 | 0.3 | 3 | 1.25 | N | 2~3 |
| QPD4-400-1000-K2-N | 0.4 | 1 | 200 | 20 | 0.6 | 18 | 0.3 | 3 | 1.3 | N | 2~3 |
| QPD4-400-1000-1K5-EN | 0.4 | 1 | 1500 | 1500 | 0.7 | 5 | 0.2 | 5 | 1.5 | SC&N | 2~3 |
| QPD4-400-2000-30 | 0.4 | 2 | 30 | 2 | 1 | 23 | 0.2 (tipe) | 2(tipikal) | 1.25 | SMA, N | 2~3 |
| QPD4-400-3000-K4-N | 0.4 | 3 | 400 | 400 | 0.8 | - | 0.4 | 5 | 1.4 | N | 2~3 |
| QPD4-400-4000-30-S | 0.4 | 4 | 30 | 2 | 1.4 | 20 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-400-6000-30 | 0.4 | 6 | 30 | 2 | 2 | 20 | 0.3 | 5 | 1.35 | SMA, N, TNC, SMP | 2~3 |
| QPD4-400-8000-30 | 0.4 | 8 | 30 | 2 | 2.2 | 18 | 0.4 | 4 | 1.4 | SMA, N | 2~3 |
| QPD4-450-6000-30-S | 0.45 | 6 | 30 | 2 | 2.4 | 20 | 0.2 | 4 | 1.3 | SMA | 2~3 |
| QPD4-500-1000-20-N | 0.5 | 1 | 20 | 1 | 0.8 | 20 | 0.2 | 3 | 1.25 | N | 2~3 |
| QPD4-500-1000-30-S | 0.5 | 1 | 30 | 2 | 0.6 | 20 | 0.3 | 3 | 1.3 | SMA | 2~3 |
| QPD4-500-2000-30 | 0.5 | 2 | 30 | 2 | 1 | 20 | 0.2 | 3 | 1.3 | SMA, N | 2~3 |
| QPD4-500-2000-K1-S | 0.5 | 2 | 100 | - | 0.75 | 18 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-500-2000-K4-NS | 0.5 | 2 | 400 | 400 | 0.7 | - | 0.6 | 5 | 1.5 | SMA&N | 2~3 |
| QPD4-500-2000-K6-N | 0.5 | 2 | 600 | 600 | 0.6 | - | 0.35 | 5 | 1.35 | N | 2~3 |
| QPD4-500-3000-30-S | 0.5 | 3 | 30 | 2 | 1 | 20 | 0.3 | 4 | 1.2 | SMA | 2~3 |
| QPD4-500-3000-50-S | 0.5 | 3 | 50 | - | 1 | 13 | 0.3 | 4 | 1.5 | SMA | 2~3 |
| QPD4-500-3000-K1-S | 0.5 | 3 | 100 | 100 | 1 | 15 | 1.2 | 5 | 1.5 | SMA | 2~3 |
| QPD4-500-4000-K1-S | 0.5 | 4 | 100 | 5 | 3.8 | 18 | 0.3 | 4 | 1.4 | SMA | 2~3 |
| QPD4-500-4000-K1-N | 0.5 | 4 | 100 | 10 | 2 | 18 | 0.3 | 4 | 1.4 | N | 2~3 |
| QPD4-500-6000-30 | 0.5 | 6 | 30 | 2 | 2 | 20 | 0.2 (tipe) | 3 (tipikal) | 1.35 | SMA, N, TNC, SMP | 2~3 |
| QPD4-500-6000-30-DC | 0.5 | 6 | 30 | 2 | 2.2 | 20 | 0.5 | 5 | 1.4 | SMA, N | 2~3 |
| QPD4-500-18000-30-S | 0.5 | 18 | 30 | 1 | 2.5 | 15 | 0.8 | 8 | 2 | SMA | 2~3 |
| QPD4-500-26500-20-S | 0.5 | 26.5 | 20 | 1 | 3 | 14 | 0.5 | 6 | 1.5 | SMA | 2~3 |
| QPD4-500-40000-20-K | 0.5 | 40 | 20 | 1 | 5 | 11 | 0.5 | 7 | 1.7 | 2.92mm | 2~3 |
| QPD4-555-3400-30-N | 0.555 | 3.4 | 30 | 2 | 1.2 | 18 | 0.3 | 4 | 1.25 | N | 2~3 |
| QPD4-600-2000-30-S | 0.6 | 2 | 30 | - | 0.8 | 20 | 0.3 | 3 | 1.25 | SMA | 2~3 |
| QPD4-600-3600-K1-S | 0.6 | 3.6 | 100 | 5 | 2 | 10 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-600-8000-30 | 0.6 | 8 | 30 | 2 | 1.5 | 20 | 0.2 (tipe) | 3 (tipikal) | 1.35 | SMA, N | 2~3 |
| QPD4-698-960-K3-NS | 0.698 | 0.96 | 300 | 300 | 0.4 | 15 | 0.2 | 3 | 1.4 | SMA&N | 2~3 |
| QPD4-698-960-K5-NS | 0.698 | 0.96 | 500 | 500 | 0.4 | 15 | 0.2 | 3 | 1.4 | N&SMA | 2~3 |
| QPD4-698-2700-50-N | 0.698 | 2.7 | 50 | 3 | 0.8 | 18 | 0.3 | 4 | 1.3 | N | 2~3 |
| QPD4-698-2700-K5-N | 0.698 | 2.7 | 500 | 100 | 0.6 | - | 0.25 | 5 | 1.45 | N | 2~3 |
| QPD4-698-4000-50-N | 0.698 | 4 | 50 | - | 2 | 20 | 0.3 | 4 | 1.25 | N | 2~3 |
| QPD4-698-4000-50-4 | 0.698 | 4 | 50 | 3 | 1.5 | 20 | 0.3 | 4 | 1.3 | 4.3/10 | 2~3 |
| QPD4-700-1100-30-S | 0.7 | 1.1 | 30 | 2 | 0.4 | 22 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-700-2000-30-N | 0.7 | 2 | 30 | 2 | 0.6 | 20 | 0.3 | 3 | 1.2 | N | 2~3 |
| QPD4-700-2700-30 | 0.7 | 2.7 | 30 | 2 | 0.8 | 20 | 0.1 | 1 | 1.3 | SMA, SMP | 2~3 |
| QPD4-700-3000-30-S | 0.7 | 3 | 30 | 2 | 0.8 | 20 | 0.3 | 4 | 1.2 | SMA | 2~3 |
| QPD4-700-3000-K4-NS | 0.7 | 3 | 400 | 400 | 0.7 | 16 | 0.8 | 8 | 1.5 | N&SMA | 2~3 |
| QPD4-700-4000-30 | 0.7 | 4 | 30 | 2 | 1 | 20 | 0.4 | 4 | 1.3 | SMA, N | 2~3 |
| QPD4-700-4700-30-N | 0.7 | 4.7 | 30 | 2 | 1.6 | 20 | 0.3 | 4 | 1.3 | N | 2~3 |
| QPD4-700-5000-30-N | 0.7 | 5 | 30 | 2 | 2 | 18 | 0.3 | 5 | 1.4 | N | 2~3 |
| QPD4-750-1710-30-S | 0.75 | 1.71 | 30 | 2 | 0.4 | 20 | 0.3 | 3 | 1.2 | SMA | 2~3 |
| QPD4-800-2500-30 | 0.8 | 2.5 | 30 | 2 | 0.5 | 20 | 0.2 | 0.5 | 1.3 | SMA, SMP | 2~3 |
| QPD4-800-2700-30-S | 0.8 | 2.7 | 30 | 2 | 0.6 | 20 | 0.3 | 4 | 1.25 | SMA | 2~3 |
| QPD4-800-3000-K5-N | 0.8 | 3 | 500 | 500 | 0.8 | - | 0.25 | 6 | 1.5 | N | 2~3 |
| QPD4-800-3100-K6-N | 0.8 | 3.1 | 600 | - | 0.65 | - | 0.3 | 5 | 1.3 | N | 2~3 |
| QPD4-800-4000-K1-S | 0.8 | 4 | 100 | 100 | 0.8 | 18 | 0.4 | 5 | 1.4 | SMA | 2~3 |
| QPD4-800-4200-K2-N | 0.8 | 4.2 | 200 | 5 | 1.8 | 18 | 0.4 | 4 | 1.4 | N | 2~3 |
| QPD4-800-5000-20-S | 0.8 | 5 | 20 | 1 | 1 | 18 | 0.15 | 2 | 1.3 | SMA | 2~3 |
| QPD4-820-1150-K8-N7 | 0.82 | 1.15 | 800 | 800 | 0.6 | 20 | 0.4 | 5 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-850-1150-K25-NS | 0.85 | 1.15 | 250 | 250 | 0.6 | 20 | 0.4 | 5 | 1.3 | SMA&N | 2~3 |
| QPD4-850-1150-K8-7N | 0.85 | 1.15 | 800 | 800 | 0.6 | 20 | 0.4 | 5 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-850-2150-30-N | 0.85 | 2.15 | 30 | 2 | 0.6 | 22 | 0.3 | 3 | 1.2 | N | 2~3 |
| QPD4-950-1220-K45-N | 0.95 | 1.22 | 450 | 450 | 0.5 | 18 | 0.3 | 3 | 1.3 | N | 2~3 |
| QPD4-950-2150-30 | 0.95 | 2.15 | 30 | 2 | 0.6 | 25 | 0.3 | 2 | 1.25 | SMA, N | 2~3 |
| QPD4-950-2150-30-DC | 0.95 | 2.15 | 30 | 2 | 0.6 | 25 | 0.3 | 2 | 1.25 | SMA, N | 2~3 |
| QPD4-1000-2000-30 | 1 | 2 | 30 | 2 | 0.8 | 20 | 0.3 | 3 | 1.3 | SMA, N | 2~3 |
| QPD4-1000-2000-K2-N | 1 | 2 | 200 | 200 | 0.6 | 15 | 0.3 | 10 | 1.5 | N | 2~3 |
| QPD4-1000-2000-K4-7N | 1 | 2 | 400 | 400 | 0.6 | 15 | 0.3 | 10 | 1.5 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1000-2000-K8-7N | 1 | 2 | 800 | 800 | 0.6 | 15 | 0.3 | 10 | 1.5 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1000-2500-K1 | 1 | 2.5 | 100 | 100 | 0.5 | 20 | 0.3 | 2 | 1.25 | N, SMA, TNC, SMP | 2~3 |
| QPD4-1000-3000-30 | 1 | 3 | 30 | 2 | 0.9 | 24 | 0.2 | 3 | 1.2 | SMA, SMP | 2~3 |
| QPD4-1000-4000-30 | 1 | 4 | 30 | 2 | 0.8 | 20 | 0.2 (tipe) | 3 (tipikal) | 1.3 | SMA, N | 2~3 |
| QPD4-1000-6000-30-S | 1 | 6 | 30 | 2 | 1.2 | 20 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-1000-6000-1K5-7N | 1 | 6 | 1500 | 1500 | 0.5 | 8 | 0.2 | 5 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1000-8000-30-S | 1 | 8 | 30 | 2 | 1.5 | 20 | 0.4 | 5 | 1.4 | SMA | 2~3 |
| QPD4-1000-8000-K1-S | 1 | 8 | 100 | 100 | 1.3 | 20 | 0.4 | 5 | 1.5 | SMA | 2~3 |
| QPD4-1000-18000-20-S | 1 | 18 | 20 | 1 | 3 | 16 | 0.5 | 6 | 1.55 | SMA | 2~3 |
| QPD4-1000-26500-20-S | 1 | 26.5 | 20 | 1 | 3 | 16 | 0.5 | 6 | 1.5 | SMA | 2~3 |
| QPD4-1000-40000-20-K | 1 | 40 | 20 | 1 | 4.8 | 16 | 0.5 | 7 | 1.7 | 2.92mm | 2~3 |
| QPD4-1000-50000-20-2 | 1 | 50 | 20 | 2 | 5.9 | 16 | 0.7 | 9 | 1.7 | 2.4mm | 2~3 |
| QPD4-1000-67000-12-V | 1 | 67 | 12 | 1 | 9.3 | 16 | 0.8 | 11 | 1.8 | 1,85mm | 2~3 |
| QPD4-1100-1700-30 | 1.1 | 1.7 | 30 | 2 | 0.5 | 20 | 0.3 | 3 | 1.2 | BNC, TNC, N | 2~3 |
| QPD4-1100-2700-K1-S | 1.1 | 2.7 | 100 | 10 | 0.6 | 18 | 0.3 | 4 | 1.25 | SMA | 2~3 |
| QPD4-1130-1250-K8-N | 1.13 | 1.25 | 800 | 800 | 0.5 | 18 | 0.3 | 5 | 1.35 | N | 2~3 |
| QPD4-1130-1250-1K5-N7 | 1.13 | 1.25 | 1500 | 1500 | 0.5 | 18 | 0.3 | 5 | 1.35 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1200-1400-K15-N | 1.2 | 1.4 | 150 | 150 | 0.35 | 18 | 0.2 | 2 | 1.3 | N | 2~3 |
| QPD4-1200-1400-K15-NS | 1.2 | 1.4 | 150 | 150 | 1 | 15 | 0.3 | 3 | 1.5 | SMA&N | 2~3 |
| QPD4-1200-1400-1K2-7N | 1.2 | 1.4 | 1200 | 1200 | 0.6 | - | 0.2 | 5 | 1.5 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1215-1785-K12-7N | 1.215 | 1.785 | 120 | 120 | 0.4 | - | 0.3 | 4 | 1.3 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-1300-2400-30-S | 1.3 | 2.4 | 30 | 2 | 0.5 | 22 | 0.1 | 1 | 1.2 | SMA | 2~3 |
| QPD4-1805-1880-K6-N | 1.805 | 1.88 | 600 | 600 | 0.6 | 18 | 0.15 | 3 | 1.3 | N | 2~3 |
| QPD4-1900-5800-30-S | 1.9 | 5.8 | 30 | 2 | 0.5 | 20 | 0.3 | 4 | 1.25 | SMA | 2~3 |
| QPD4-2000-4000-30 | 2 | 4 | 30 | 2 | 0.8 | 20 | 0.3 | 3 | 1.25 | SMA, N | 2~3 |
| QPD4-2000-4000-K1-S | 2 | 4 | 100 | 100 | 0.8 | 16 | 0.3 | 6 | 1.4 | SMA | 2~3 |
| QPD4-2000-4000-1K2-NS | 2 | 4 | 1200 | 1200 | 0.8 | 15 | 0.5 | 10 | 1.5 | SMA&N | 2~3 |
| QPD4-2000-6000-30 | 2 | 6 | 30 | 2 | 1 | 20 | 0.3 | 4 | 1.25 | SMA, N | 2~3 |
| QPD4-2000-6000-K4 | 2 | 6 | 400 | - | 0.8 | 15 | 0.5 | 10 | 1.6 | SMA, N | 2~3 |
| QPD4-2000-6000-K5-N | 2 | 6 | 500 | 500 | 0.8 | 15 | 0.5 | 10 | 1.6 | N | 2~3 |
| QPD4-2000-6000-K6-N | 2 | 6 | 600 | 600 | 0.5 | - | 0.3 | 4 | 1.4 | N | 2~3 |
| QPD4-2000-6000-K65-7N | 2 | 6 | 650 | 650 | 0.5 | - | 0.3 | 4 | 1.4 | 7/16 DIN (L29)&N | 2~3 |
| QPD4-2000-8000-30 | 2 | 8 | 30 | 2 | 1.1 | 20 | 0.3 | 1 | 1.4 | SMA, N, TNC, SMP | 2~3 |
| QPD4-2000-8000-K25-N | 2 | 8 | 250 | 250 | 0.7 | - | 0.2 | 4 | 1.5 | N | 2~3 |
| QPD4-2000-9000-30-S | 2 | 9 | 30 | 2 | 1.8 | 18 | 0.3 | 4 | 1.4 | SMA | 2~3 |
| QPD4-2000-12000-20-S | 2 | 12 | 20 | 1 | 1.6 | 17 | 0.4 | 5 | 1.5 | SMA | 2~3 |
| QPD4-2000-18000-20-S | 2 | 18 | 20 | 1 | 1.6 | 18 | 0.4 | 6 | 1.5 | SMA | 2~3 |
| QPD4-2000-18000-20-N | 2 | 18 | 20 | 1 | 2.2 | 17 | 0.4 | 6 | 1.6 | N | 2~3 |
| QPD4-2000-18000-K1-S | 2 | 18 | 100 | 100 | 1.8 | - | 0.5 | 6 | 1.6 | SMA | 2~3 |
| QPD4-2000-26500-20-S | 2 | 26.5 | 20 | 1 | 2.6 | 16 | 0.5 | 6 | 1.7 | SMA | 2~3 |
| QPD4-2000-40000-20-K-1 | 2 | 40 | 20 | 1 | 3 | 15 | 0.5 | 10 | 2.1 | 2.92mm | 2~3 |
| QPD4-2000-50000-20-2 | 2 | 50 | 20 | 1 | 4.8 | 16 | 0.6 | 10 | 1.7 | 2.4mm | 2~3 |
| QPD4-2000-67000-12-V | 2 | 67 | 12 | 1 | 6.8 | 16 | 0.8 | 10 | 1.8 | 1,85mm | 2~3 |
| QPD4-2400-5900-50-N | 2.4 | 5.9 | 50 | 3 | 0.6 | 18 | 0.2 | 3 | 1.3 | N | 2~3 |
| QPD4-2430-2470-K1-N | 2.43 | 2.47 | 100 | 100 | 0.5 | 20 | 0.3 | 3 | 1.25 | N | 2~3 |
| QPD4-2500-4000-K2-N | 2.5 | 4 | 200 | 20 | 1 | 18 | 0.3 | 4 | 1.35 | N | 2~3 |
| QPD4-2600-3500-K15-N | 2.6 | 3.5 | 150 | 10 | 0.5 | 18 | 0.2 | 3 | 1.25 | N | 2~3 |
| QPD4-3000-5000-K1-N | 3 | 5 | 100 | 10 | 0.8 | 18 | 0.3 | 4 | 1.25 | N | 2~3 |
| QPD4-3400-3800-K1-N | 3.4 | 3.8 | 100 | 10 | 0.6 | 20 | 0.2 | 3 | 1.25 | N | 2~3 |
| QPD4-4000-8000-30-S | 4 | 8 | 30 | 2 | 0.6 | 20 | 0.3 | 3 | 1.3 | SMA | 2~3 |
| QPD4-4000-8000-K4-N | 4 | 8 | 400 | 400 | 0.9 | 16 | 0.6 | 5 | 1.5 | N | 2~3 |
| QPD4-4000-12000-30-S | 4 | 12 | 30 | 2 | 1.2 | 18 | 0.2 | 5 | 1.4 | SMA | 2~3 |
| QPD4-4000-18000-20-S | 4 | 18 | 20 | 1 | 1.6 | 18 | 0.4 | 6 | 1.5 | SMA | 2~3 |
| QPD4-5400-5800-K3-N | 5.4 | 5.8 | 300 | 300 | 0.4 | 18 | 0.4 | 5 | 1.4 | N | 2~3 |
| QPD4-5400-5800-K3-S | 5.4 | 5.8 | 300 | - | 0.4 | 18 | 0.4 | 5 | 1.4 | SMA | 2~3 |
| QPD4-5400-6800-20-S | 5.4 | 6.8 | 20 | 1 | 0.6 | 20 | 0.4 | 4 | 1.3 | SMA | 2~3 |
| QPD4-5500-6000-30-SM | 5.5 | 6 | 30 | 2 | 0.6 | 20 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-5900-8000-K15-S | 5.9 | 8 | 150 | - | 0.8 | 18 | 0.5 | 5 | 1.4 | SMA | 2~3 |
| QPD4-6000-11000-20-S | 6 | 11 | 20 | 1 | 1 | 18 | 0.3 | 4 | 1.3 | SMA | 2~3 |
| QPD4-6000-18000-20-S | 6 | 18 | 20 | 1 | 1.3 | 18 | 0.3 | 6 | 1.5 | SMA | 2~3 |
| QPD4-6000-18000-50-SMS | 6 | 18 | 50 | - | 1.5 | 18 | 0.4 | 5 | 1.6 | SMA | 2~3 |
| QPD4-6000-18000-K1-S | 6 | 18 | 100 | - | 1.5 | 15 | 0.4 | 5 | 1.6 | SMA | 2~3 |
| QPD4-6000-18000-K1-S-1 | 6 | 18 | 100 | 100 | 0.7 | 15 | 0.5 | 8 | 1.6 | SMA | 2~3 |
| QPD4-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 1.9 | 18 | 0.4 | 4 | 1.6 | SMA | 2~3 |
| QPD4-6000-40000-20-K | 6 | 40 | 20 | 1 | 3 | 16 | 0.5 | 6 | 1.6 | 2.92mm | 2~3 |
| QPD4-6000-50000-20-2 | 6 | 50 | 20 | 1 | 3.4 | 18 | 0.6 | 7 | 1.7 | 2.4mm | 2~3 |
| QPD4-6000-67000-12-V | 6 | 67 | 12 | 1 | 4.5 | 16 | 0.8 | 10 | 1.8 | 1,85mm | 2~3 |
| QPD4-6900-7400-30-S | 6.9 | 7.4 | 30 | 2 | 0.5 | 20 | 0.3 | 3 | 1.25 | SMA | 2~3 |
| QPD4-7000-9000-K2-S | 7 | 9 | 200 | 200 | 0.8 | 17 | 0.5 | 5 | 1.4 | SMA | 2~3 |
| QPD4-7000-9000-30 | 7 | 9 | 30 | 2 | 0.6 | 18 | 0.2 | 3 | 1.3 | SMA, N | 2~3 |
| QPD4-8000-12000-30-S | 8 | 12 | 30 | 2 | 1 | 18 | 0.4 | 5 | 1.3 | SMA | 2~3 |
| QPD4-8000-30000-20-K | 8 | 30 | 20 | 1 | 1.6 | 16 | 0.4 | 4 | 1.5 | 2.92mm | 2~3 |
| QPD4-10000-26500-20-K | 10 | 26.5 | 20 | 1 | 1.2 | 16 | 0.4 | 6 | 1.5 | 2.92mm | 2~3 |
| QPD4-10000-40000-20-K | 10 | 40 | 20 | 1 | 1.5 | 16 | 0.4 | 6 | 1.5 | 2.92mm | 2~3 |
| QPD4-10900-12700-20 | 10.9 | 12.7 | 20 | 1 | 1 | 18 | 0.4 | 5 | 1.4 | SMA, N | 2~3 |
| QPD4-12000-15000-20-S | 12 | 15 | 20 | 1 | 1 | 18 | 0.3 | 4 | 1.4 | SMA | 2~3 |
| QPD4-13750-14500-20 | 13.75 | 14.5 | 20 | 1 | 1 | 18 | 0.4 | 5 | 1.4 | SMA, N | 2~3 |
| QPD4-15000-17000-20-S | 15 | 17 | 20 | 1 | 1.2 | 18 | 0.4 | 4 | 1.4 | SMA | 2~3 |
| QPD4-18000-26500-20-K | 18 | 26.5 | 20 | 1 | 1.6 | 16 | 0.4 | 6 | 1.6 | 2.92mm | 2~3 |
| QPD4-18000-40000-20-K | 18 | 40 | 20 | 1 | 1.5 | 16 | 0.4 | 6 | 1.5 | 2.92mm | 2~3 |
| QPD4-18000-50000-20-2 | 18 | 50 | 20 | 1 | 2.5 | 15 | 0.6 | 10 | 1.8 | 2.4mm | 2~3 |
| QPD4-18000-67000-12-V | 18 | 67 | 12 | 1 | 3.6 | 16 | 0.8 | 10 | 1.8 | 1,85mm | 2~3 |
| QPD4-19000-33000-20-K | 19 | 33 | 20 | 1 | 1.5 | 18 | 0.4 | 5 | 1.5 | 2.92mm | 2~3 |
| QPD4-24000-30000-20-K | 24 | 30 | 20 | 1 | 1 | 16 | 0.4 | 6 | 1.5 | 2.92mm | 2~3 |
| QPD4-24000-40000-20-K | 24 | 40 | 20 | 1 | 1.6 | 16 | 0.4 | 8 | 1.8 | 2.92mm | 2~3 |
| QPD4-24500-25500-1-K | 24.5 | 25.5 | 1 | - | 1.5 | 20 | 0.7 | 10 | 1.5 | 2.92mm | 2~3 |
| QPD4-25000-50000-20-V | 25 | 50 | 20 | 1 | 2 | 15 | 0.6 | 10 | 1.8 | 1,85mm | 2~3 |
| QPD4-26000-31000-20-K | 26 | 31 | 20 | 1 | 1.4 | 16 | 0.4 | 6 | 1.5 | 2.92mm | 2~3 |
| QPD4-26500-67000-12-V | 26.5 | 67 | 12 | 1 | 3.6 | 16 | 0.7 | 9 | 1.8 | 1,85mm | 2~3 |
| QPD4-34000-36000-20-K | 34 | 36 | 20 | 1 | 1.4 | 16 | 0.4 | 5 | 1.5 | 2.92mm | 2~3 |
| QPD4-40000-67000-12-V | 40 | 67 | 12 | 1 | 3.8 | 16 | 0.8 | 10 | 1.9 | 1,85mm | 2~3 |
-
Saklar Dioda PIN SPST SP1T Broadband Iso Luhur...
-
Kopling Pandu Palang Dua Arah Broadband ...
-
Pangwates Gelombang Mikro RF Gelombang Milimeter Frekuensi Luhur...
-
Mixer Harmonik RF Microwave Gelombang Milimeter Hi...
-
Pembagi Daya 18 Arah／Combiner RF Microwave M...
-
Terminal Lempeng Kalayan Konektor Logam PCB Con...